1500 GPH Rule-Mate Fully Automated Bilge Pump | Rule RM1500A

With a Rule 1500 automatic bilge pump, removing excess water from the bottom of any vessel is easy. This fully automated pump has a built-in sensor to detect when the water reaches 2.5 inches deep. It then turns on, transferring water at a rate of 1,500 gallons per hour until the level drops to 5/8-inch.

The low current draw, eco-friendly design and rust-resistant materials make a Rule-Mate 1500 an ideal pump for large boats. It has a removable motor for cleaning and is calibrated so oil spills won’t cause activation. Update your watercraft with free U.S. shipping on a 1500 GPH Rule bilge pump.

• Rule-Mate bilge pump
• 1,500 GPH/6,819 LPH flow rate
• The pump automatically turns on when the water level rises above 2.5 inches and shuts off when the water drops below the shut-off sensor level of 5/8-inch.
• An all-in-one pump with an internal field effect sensor switch that eliminates the need for an external float switch.
• Uses eco-friendly field effect technology.
• The sensor switch is calibrated to only turn on when water is present — it will not turn on from oil overspill in the bilge.
• The silent motor is designed for years of reliable usage.
• The pump is fully submersible.
• Manufactured to resist rust and corrosion.
• Snap-off pump base strainer allows removal of the pump motor to clean out debris.
• The discharge port has one-inch NPT threads.
• Includes (1) one-inch straight, (1) 1-1/8-inch straight and (1) 1-1/8-inch 90-degree hose barb discharge ports to adapt to different size thru hulls.
• 12-volt DC operation
• 4.8-amp draw at 12 volts DC
• Low amperage draw when sensing for water to conserve battery power.
• 7.5-amp fuse size
• Marine-grade blocked wiring
• Ignition-protected and safe for use aboard gasoline-powered boats.
• CE and ISO certified
• Limited three-year manufacturer’s warranty
• Dimensions: 7-1/4 inch length x 4 inch width x 6 inch height